:	Jun 16, 2004

.

: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. Raise and support the vehicle.

.

If installed, remove the transmission undershield.   Remove the 6 bolts.

.

Remove the OSS sensor.   Disconnect the electrical connector.   Remove the Torx screw.

.

Install the OSS sensor.   Clean the component mating faces.   Tighten the Torx screw to 10 Nm (7 lb.ft).   Connect the electrical connector.

.

If installed, install the transmission undershield.   Tighten the bolts to 10 Nm (7 lb.ft).